- FAQ
The Raspberry Pi UC housing has a modular structure and can be used with many Raspberry Pi models as well as with various SSD converters and HATs. The basis is always a Raspberry Pi with an SSD converter. A sound card can be used as an option.
| Pos. | Quantity | Part-number | Name | Material | Producer | Supplier |
| 1 | 1 | HTPC-2002 | Raspberry Pi UC upper case | PLA or ABS | - | - |
| 2 | 1 | HTPC-2001 | Raspberry Pi UC lower case | PLA or ABS | - | - |
| 3 | 4 | HTPC-2003 | Raspberry Pi UC device base | PLA or ABS | - | - |
| 4 | 1 | HTPC-1209 | Raspberry Pi UC switch braket | PLA or ABS | - | - |
| 5 | 4 | HTPC-2006 | Raspberry Pi UC device stopper | Rubber | - | - |
| 6 | 1 | HTPC-XXXX | Raspberry Pi UC LAN/USB cover | PLA or ABS | - | - |
| 7 | 1 | HTPC-ZZZZ | Raspberry Pi UC Power cover | PLA or ABS | - | - |
| 8 | 1 | HTPC-2010 | Raspberry Pi UC switch | PLA or ABS | - | - |
| 9 | 1 | HTPC-NNNN | Raspberry Pi / SSD assembly | - | - | - |
| 10 | 1 | HTPC-2320 | OSOYOO 5" DSI Touch Display | - | OSOYOO | OSOYOO |
| 11 | 1 | HTPC-2321 | DSI Displaycable 15PIN AWN 20624 80C 60V VW-1, Lenght 25cm ATTENTION: No standard Raspberry Pi DSI cable! The contacts must be on the same side at both ends. |
- | Ebay | |
| 12 | 1 | HTPC-1050 | Switch (Mini Drucktaster HQ, 1-polig, Schließer OFF-(ON)) | BerryBase | ||
| 13 | 9 | HTPC-2005 | Countersunk screw DIN 965-M4x16, schwarz | Stahl | - | Screwsandmore |
| 14 | 8 | HTPC-1005 | Pan head screw ISO 14583-M2,5x8 , Lenght 7mm works to | Stahl | - | Reichelt |
| 15 | 5 | HTPC-2004 | Nut DIN 934-M4 | Stahl | - | Screwsandmore |
The Raspberry Pi Universal Case can be used with:
The following SSD converters can also be used:
- Renkforce M.2 SATA SSD Konverter (USB 2.0, Raspberry Pi 3B und 4B)
- SupTronics X860 M.2 SATA SSD Shield (USB 2.0. Raspberry Pi 3B)
- SupTronics X872 M.2 NVMe SSD Shield (USB 3.0, Raspberry Pi 4B)
- SupTronics X862 M.2 SATA SSD Shield (USB 3.0, Raspberry Pi 4B)
Optionally, the Raspberry Pi stack can be expanded with a HifiBerry sound card. The necessary interface covers are already available for the following sound cards:
| Pos. | Quantity | Partnumber | Name | Material | Producer | Supplier |
| 1 | 1 | Raspberry Pi
|
- | Raspberry Pi | Diverse | |
| 2 | 1 | SSD Konverter für M.2 SATA SSD |
Renkforce oder SubTronics |
|||
| 3 | 1 | M.2 SATA SSD (Gestestet und funktioniert, WD Blue 500GB) | - | Diverse | Diverse | |
| 4 | 1 | Optional HifiBerry Soundkarte | - | HifiBerry | Diverse | |
| 5 | 1 | je nach Konfiguration siehe Zeichnung | Raspberry Pi UC Power Blende | |||
| 6 | 1 | je nach Konfiguration siehe Zeichnung | Raspberry Pi UC LAN/USB Blende | PLA oder ABS | - | - |
| 7 | Abstandshalter M2,5x12 | Stahl oder Messing | Reichelt | |||
| Netzteil für Raspberry Pi 3B | BerryBase |
The necessary components for an HTPC based on Raspberry Pi can be found in the assembly drawing. There is an example drawing for the complete housing and several with the different Raspberry Pi stacks. For another variant, only the Raspberry Pi stack with the appropriate interface covers has to be exchanged. When using a Raspberry Pi 4B, the additional cooling system with a 5V axial fan is recommended, otherwise the processor will be throttled by excessive heat. With a Raspberry Pi 3B / 3B +, passive cooling with heat sinks is sufficient.
Assembly drawings:
- HTPC Gesammtbaugruppe
- Stapel Raspberry Pi 3B + Renkforce SSD Converter
- Stapel Raspberry Pi 3B + Renkforce SSD Converter + HifiBerry DAC
- Stapel Raspberry Pi 3B + SupTronics X860 SSD Shield
- Stapel Raspberry Pi 3B + SupTronics X860 SSD Shield + HifiBerry DAC