Digitalkamera HOWTO
The Advanced Camera Device is a DIY project. So you have to assemble the device yourself, but do not worry, you do not need a soldering iron, just a screwdriver and some glue. Also a ungeuber gets the device in under 1 hour mounted.
Parts list
| Pos. | Parts |
Item number | Name | Producer | Supplier |
| 1 | 1 | Raspberry Pi 3 Model B or B+ | Raspberry Pi Foundation | ||
| 2 | 1 | Micro SD-card with UHS-I min. 8GB e.g. SanDisk Ultra |
Various |
|
|
| 3 | 1 | Renkforce Raspberry Pi USB to M.2 SATA SSD converter | Renkforce (Conrad) | ||
| 4 | 1 | Renkforce Raspbery PI USB to SD 3.0 (SDXC) converter | Renkforce (Conrad) | ||
| 5 | 1 | Pimoroni HyperPixel 4.0 Touch Display (Attention is also a display version without touch!) |
Pimoroni | ||
| 2 | deleyCON USB Cable, MK-MK2321 0,15m | deleyCON | |||
| 6 | 1 | M.2 SATA SSD at your choice 16GB to 2TB possible e.g. Intenso M.2 SATA SSD 256GB |
Various |
|
|
| 7 | 1 | Screw M2,5 x 7 (*) | Bopla | ||
| 8 | 4 | Spacer 8 mm, M2.5 (*) | S.A BOURQUI JEAN | ||
| 9 | 4 | Spacer 12 mm, M2.5 (*) | S.A BOURQUI JEAN | ||
| 10 | 1 | 1/4 Zoll - 20 UNC Nut, Steel (*) | - | ||
| 11 | 1 |
ACD Casing Parts |
for self printing (HP Multi Jet Fusion) |
(*) Included in the Multimedia4Linux assembly kit
Tested M.2 SATA SSD's
Please note the manufacturer's instructions when purchasing the SSD. The following SSDs have been successfully tested with the Renkforce converter:
| Capacitance | Name | Article name | Producer | Supplier |
| 500GB | WD Blue 3D NAND SATA SSD | WDS500G2B0B | Western Digital |
Calculation:
Recommended accessories
| Pos | Parts |
Iten number | Name | Producer | Supplier |
| 1 | 1 | Hot shoe adapter | China import | Ebay | |
| 1 | 1 | Hot shoe adapter with joint / ball joint |
Divers | ||
| 2 | 1 | Powerbank Anker PowerCore 13000 | Anker | Anker | |
| 3 | 1 | Charger / power supply Anker PowerPort+ 1 with Quick Charge 3.0 | Anker | Anker |
Casing 3D-printing data
- Multimedia4Linux 3D-printing license
- Multimedia4Linux assembly kit
- STL 3D-print data ACD-Casing
- STL 3D-print data NAS-Casing (without cardreader and tripod socket)
Assembly Instructions
Operation system
For the operating system you need an 8Gb micro SD card. The card should be as fast as possible, so that the device boots quickly and the programs can be started quickly. How to transfer the operating system image to the SD card you can read here.
- Operatingsystem Image ACD-OS 1.0.0 (3,6GB, md5sum -> e8d20697599fa23d24f22731bcd95066)
- Operatingsystem Image ACD-OS 1.1.0 (3,9GB, md5sum -> 05abaf8ed9a9f5f0ec3871a56067a6fc)
- Operatingsystem Image ACD-OS 1.2.0 (4,1GB, md5sum -> 2978b6f8ad7891a92b54135e9d56834a)
- Operatingsystem Image ACD-OS 1.2.1 (4,1GB, md5sum -> 4f9964e54e3ca17a071d9623da7c5f2f)
- Operatingsystem Image ACD-OS 1.2.2 (2,8GB, md5sum -> eed510ababc615b16b450e1749599622)
- Operatingsystem Image ACD-OS 1.2.3 (2,8GB, md5sum -> 854ef98bebd773468d80643efe9f8473)
- Operatingsystem Image ACD-OS 1.3.0 (3,0GB, md5sum -> 77084705a1c195f87c5ad7a31a01d6d1)
- Operatingsystem Image ACD-OS 1.3.1 (3,0GB, md5sum -> 2df795d1da23352ceacb8d234b127629)
- Operatingsystem Image ACD-OS 1.3.2 (3,0GB, md5sum -> aac3e93cc5411ffb7e5ad0bb4d1b9300)
Manual
Back to the Advanced Camera Device